Blog

Water Heater Insulation

Posted by on Apr 6, 2015 in Gas Water Heater Repair Athens GA, Water Heater Repair Athens GA | 0 comments

Most property owners appreciate getting new strategies to help minimize heating costs in the cold months we realize at Water Heater Repair Athens GA. And, considering that ones water heater runs far more in the wintertime doing just that, we have gathered some suggestions to pass along today on ways to save on energy costs.

Here is a simple method to determine ones water heater’s need for insulation: put ones hand near or on the exterior of the water heater’s storage tank. It is feels warm, insulating the tank is suggested. This loss of heat in the winter season will add up. And then, in the summertime, it can add heat to the space that one will want to attempt to cool if the water heater is situated within the house and not in a garage. Any heat that is felt is certainly heat getting sacrificed. If it is not warm at all that is a great indication that the tank’s internal insulation is in respectable shape. Brand-new water heating units are being produced with a good quantity of internal insulation today. The R-value is found on the producer’s tag so one can see exactly what the number is. If it R-24 or higher, one will most likely not have to use an insulation blanket on the water heater.

Athens Water Heater Blankets

A water heater blanket or wrap helps get rid of a lot of this heat loss. Initially consult your energy company, for many give insulation kits at decreased expenses for property owners. These hot water heater blankets be available in various sizes depending upon the gallon size of the storage tank. The greater the R-value, the greater the insulation is. It is recommended utilizing one that is at the very least an R-11.

The blankets are straightforward to fit. They will have insulation tape to complete the joints of the blanket. The shinny or vinyl side should go on the exterior.

With gas water heaters, wrap it around, while not covering the top flue, and unwrapped over the controller at the bottom. Likewise, never cover the T&P valve lever, or the underside of tank for this will obstruct air from getting into the tank. With electric water heaters, because there is no exhaust flue on the top, it may be covered, however do not cover the heating-element access panels.

These water heater blankets will certainly last a very long time. It may be used again when the water heater is changed, providing it’s the exact same size to match the storage tank.

Water Heater Pipe Insulation

There’s 2 different kinds of pipe insulations that ought to be utilized for a water heater. All pipes positioned inside of six inches from the water heater exhaust flue, fiberglass insulation wrap ought to be utilized and ought to be connected with either high temperature aluminum tape or wire. Pipes beyond 6 inches can be covered in foam insulation sleeves.

The United States Department of Energy indicates that property owners insulate a minimum of six feet of the pipe entering and from the water heater. This can boost the temperature level at the faucets 2 to 4 degrees and conserve cash on heating. We in addition advise wrapping both the cold and hot pipes too.

Energy Savings from Athens Water Heater Insulation

Insulating an ineffective water heater will help trim the expense of operating that heater by 5 % to 10 %. Depending upon the design, that can conserve anywhere from $5 to $20 annually, meaning that a water heater blanket can be paid for in 1 to 4 years. Adding insulation could very well lessen standby heat losses by 25 % – 45 % and conserve around 4 % – 9 % in water heating expenses.

How to Get Rid of Water Heater Odors

Posted by on Mar 11, 2015 in Water Heater Repair Athens GA | 0 comments

Are you experiencing an issue with stinky odors originating from the water originating from your water heater? It occurs in certain cases for a few various reasons. Here is what Water Heater Repair Athens GA advises to do to have your water smelling and tasting much better quickly.

Reasons for Athens Water Heater Smells?

According to Soquel Creek Water District, “The smell is the result of four factors that must all be present for the odor to develop. These factors include:

  • A high concentration of sulfate in the raw water
  • Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
  • Little or no dissolved oxygen in the water
  • Hydrogen (a component of water which may be present due to water conditions reacting with the anode)”  Read more: http://www.soquelcreekwater.org/content/how-get-rid-odor-water

The most usual reason for hot water smell is microorganisms getting into the water supply. This is more common in houses that make use of well water and cities that make use of wells as their water supply.

With a water heater temperature level setting of 140 degrees or higher will assist in minimizing the development of microorganisms inside of the water storage tank.

How You Can Get Rid of Foul Water Odors

The following instructions describe how you can use chlorine bleach to thoroughly clean a water heater.

The electric or gas leading to the water heater tank has to first be turned off.

Next, the cold water supply off that goes to the tank needs to be turned off.

Open the hot water faucet of the kitchen area sink to permit air to get in the tank.

With a a yard hose hooked up to the storage tank drain valve, drain the water inside the water heater.

Then shut the drain valve as soon as it is empty.

The next step is putting in the bleach.
If the hose for the cold water going inside the storage tank is a flexible line, unscrew it from the tank. Otherwise, one will have to take off the pressure relief valve, which is more involved. For electric water heaters, one of the elements can be removed.

Make use of a funnel to get bleach inside the tank.
Add 5 ounces of bleach per gallon of the tank ability.
Case in point – A 50 gallon water heater will require 250 ounces of bleach, that is around 2 gallons.

Reinstall the water line or pressure relief valve.

Fill the tank back up with water once more.

Close up the hot water faucet of the kitchen area faucet as quickly as all the air runs out the line.

Operate all the hot water appliances up until the aroma of bleach is distinct. We want to get rid of the microorganisms that can be found in the water lines likewise, not only inside of the water heater.

Allow the water to stay in the tank and water lines undisturbed for 2 to 3 hours.

Empty the storage tank once more and refill it. This time let it remain undisturbed for thirty minutes and drain it one additional time.

Fill the tank back up. Open all the hot water appliances and let them run up until the scent of bleach is gone.

For gas water heaters, relight the water heater pilot burner. For electric water heaters, turn the electricity on once more.

In addition, by replacing the anode rods, or maybe the type utilized can accomplish the same goal as the next video demonstrates:

More Resources

Controlling Odors in Hot Water Heaters – City of Fellsmere

Solving rotten-egg odor in water heaters

Your Household Water Quality: Odors in Your Water

Repairing a Noisy Athens Water Heater

Posted by on Feb 26, 2015 in Water Heater Repair Athens GA | 0 comments

Water Heater Repair Athens GA is often being contacted to have a look at a loud water heater. Popping and knocking noises could possibly be as a consequence of a problem with the water heater, but it’s additionally an inconvenience. We are going to detail the most probable reason your water heater may begin creating noise and what you can possibly do to calm it down! Prior to contacting a Athens expert, examine one of the most typical water heater issues and remedies.

The most possible reason a water heater creates noise

Again, if the sound is an hint of an issue with the heater that issue is more than likely sediment build up. The sediment originates from the water in the storage tank. It is predominantly composed of calcium and magnesium debris and is primarily an issue in properties which have hard water.

Whenever the sediment starts to develop at the bottom of the storage tank, it traps a little part of hot water below it. This will cause the hot water to boil as the tank operates. The sounds noticed are the bubbles popping through the sediment.

Additionally, the sediment itself may well be the reason for the sounds. The sediment sits at the bottom of the tank and can get burnt up resulting in irregular sounds. And sometimes, the sediment can get carried up to the top of the tank and breaks off resulting in sounds as it drops back down, striking the sides on its way.

How to avoid a water heater from creating noise

If sediment build-up is what’s resulting in the sounds, the heater should be assessed. Hot Water Heater Repair Athens GA can accomplish this and provide the tank a flush or recommend an additional treatment.

You can also reduce sediment build-up by having expert servicing carried out on the storage tank approximately annually. This technique involves flushing the tank of any sediment.

One more excellent solution is to set up a water softener in your Athens residence. Water softeners eliminate minerals from the water prior to it entering the water heater, considerably minimizing sediment build up.

For additional information about other likely troubles and options offer Water Heater Repair Athens GA a phone call!

What is the Perfect Athens Water Heater Temperature

Posted by on Sep 30, 2014 in Water Heater Repair Athens GA | 0 comments

There are diverse views on exactly what is the best temperature at which to set ones water heater. Water Heater Repair Athens GA will be sharing a few of the various views with particular proof from those sources in order for one to make his/her own choice on the topic.

To begin with, the default setting most water heater producers have their products set at is 140 degrees. If you have actually never examined this already on your Athens water heater, that could be the temperature it is set. Likewise, it can be hard to know for sure exactly what the temperature setting is because sometimes the temperature dial does not have degrees written on it, simply warm, hot, really hot … something to that end. Some people feel they are pre-set at a higher temperature level so it feels remarkable to have a lot of hot water – kind of like attempting to create good brand awareness in customers.

In regards to energy cost savings, by turning a water heater down from 140 to 120 degrees, it will save between 6 to 10 percent of total energy used. That equates to between $6 to $20 a year most of the time.

Let’s begin with the most likely the most popular source, the U.S. Department of Energy. They recommend a setting of 120 degrees. The link to their website above offers lots of excellent information on the best ways to lower ones hot water consumption and expenses. It is certainly worth a read.

Now for the health risks of too low of a temperature setting. It can be revealed that Legionella bacteria has the optimum growth range in between 68 to 122 degrees. It is believed that 25 percent of all water heaters have varying levels of Legionella bacteria contamination.

Legionella bacteria causes a kind of pneumonia and is passed to humans when one breathes in water contaminated with the bacteria – normally in showers, whirlpool baths or even a/c systems. Consuming the water is generally ok. It is a concern with having the germs get in ones lungs.

The Centers for Disease Control and Prevention approximates 8,000 to 18,000 Americans contract the illness annually. Five to 30 percent of the cases are deadly.

According to OSHA, “At low levels of contamination, the chance of getting Legionnaires’ disease from a water source is very slight. The problem arises when high concentrations of the organism grow in water systems. Water heaters, cooling towers, and warm, stagnant water can provide ideal conditions for the growth of the organism.”  (read more)

Cases to not have the water heater temperature level set at 140 degrees would be if there are kids in the house or potentially with elderly individuals too. The threat of being burnt if the faucet was fully on hot water can be too great. Obviously, anybody living in the home that is at risk of contracting Legionella Disease need to have it set at 140.

Summary

So decide if there are any issues of people burning themselves if the water temperature level is too hot. Also, be mindful of anybody who has issues of contracting Legionella Disease. Considering that the annual cost savings of turning the temperature level down is only about $20 most the time with the typical home’s hot water use, it might be a great choice to keep the temperature level above 120 degrees just for the wellness related advantages; nevertheless, Hot Water Heater Repair Athens GA will let you make the call.

The following infographic summarizes this conversation:

Water Heater Repair Athens GA

Preventative Water Heater Maintenance in 10 Minutes

Posted by on Sep 24, 2014 in Water Heater Repair Athens GA | 0 comments

Water heater maintenance in ten minutes? Yes, that is correct. Water Heater Repair Athens GA is going to show one how to do some water heater preventative maintenance. And, that’s all it will take to do these 2 important water heater upkeep steps; nevertheless, we know that these will do an exceptional task of assisting with three things:

  • Having the water heater last as long as possible for it will save on cash with using it.
  • Ensuring a water heater runs safely is vital for we do not want it to blow up in in ones house.
  • And having it run more energy efficiently also helps one conserve one some money.

We are now prepared to invest 10 minutes once or twice a year to help save some money on energy costs.

Testing the T&P Relief Valve
The T&P Valve, also referred to as the temperature and pressure relief valve, has an important task. It’s role is to help make sure excess pressure inside the water tank does not build up, or in even more simple terms, it sees to it that the water heater does not explode. The T&P valve is the part that has a lever or little handle. Simply lift it some then let go of it back. It should snap back to its closed position rapidly. A little water should be heard entering into the drain pipe below the lever that was just raised and maybe heard some pressure being released at the same time. If none of these things have actually occurred throughout the test, the valve will require to be changed.

Do a Mini Water Heater Tank Flush
Naturally, rust and corrosion will occur inside the water tank due to the chemical reactions taking place with all the parts inside that are required to heat water. We will not get too technical here, however it is easy to help prevent this process by doing a flush or draining of all or a portion of the water in the tank.

For simply a small flush, position a container under the drain valve below the tank. Open the drain valve and fill up the pail with water. Drain at least a few gallons of water in all. Let the water sit in the bucket for a couple of minutes to settle and analyze if there is much that settles to the bottom of the pail. If there is, if the water heater has actually not been drained for a very long time (or ever), it would be best to do a full flush of the tank to get as much of the sediment out as possible. You will want to turn the temperature dial down and might want to let the water cool down for about an hour first so it is not too hot while draining it. Likewise, it would be simpler to connect a hose to the drain valve and let the water go outside instead of using buckets.

If the water looks reasonably clean and clear from the tiny test you should be all set. When the water heater has a large quantity of sediment inside of it, it can make loud popping noises and it reduces its effectiveness too.

Though water heaters are relatively upkeep free and simple to run, any time one feels the smallest uncomfortable or are uncertain of exactly what to do, it is always best to have give Water Heater Repair Athens a call to assist with ones regular water heater maintenance.

Here is an infographic that illustrates these steps, and check out our blog more water heater tips and advice.

Water Heater Repair Athens GA

Athens Water Heater Safety Precautions

Posted by on Sep 22, 2014 in Plumbing Repair Athens GA, Water Heater Repair Athens GA | 0 comments

Effectively maintaining ones water heater is crucial not simply so it works to its full capacity and can save some energy money, but for safety issues too. Yes, it can blow up – it doesn’t occur too typically for property owners, but undoubtedly this is something that Water Heater Repair Athens GA does not wish to have occur to you!

Vents
Venting can be type of technical however we will go over the essentials here. The vent need to be the same diameter as the draft diverter of the water heater tank. It is expected to increase and out (for atmospherically vented heaters). Not other directs like up, down, up and out. For direct-vent water heaters, the vent ought to head out a side wall. When it comes to power-vent heaters, the fan blows the fumes out, so there is some versatility in the direction they are vented.

Any roofing system or wall that the vent goes through need to be a double wall. The single wall pass throughs must be screwed with three screws per area. If these essentials are not followed, the vents can fall apart in time and carbon monoxide gas can cause major problems within ones house. Obviously we don’t want that to take place!

The only other interested in ventilation is that of backdrafting. The fumes can consume the vents with acid condensation. If enough of this gets on cold piping and the water heater it will not be a great circumstance for a properly working water heater. If the fumes go back inside the rather of being appropriately vented outside, the fumes can get in the living locations of the home. Soot issues can occur too.

Dielectric Connectors
The steel water heater is connected to cooper pipes by the dielectric connectors. When two these two metals are assembled in water electrolysis happens. The procedure rusts one metal away to secure the other. This process is important in shielding the inside of the water heater. Inspection for leakages must be done where the connections are made.

Temperature and Pressure Relief Valve
This is kinda of a crucial part of the water heater, for it helps ensure the darn thing does not blow up under pressure if the temperature goes beyond the proper limits the water heater is developed for. Once a year (at least) the T&P valve should be examined to make certain, it is working correctly, for they can be vulnerable to failure. Simply pulling up on the handle water needs to stream easily out and stop when the handle is released. If it simply runs or drips, or does nothing at all, it will should be replaced.

The drain lines for the T&P line ought to not be directed up, because water does not stream uphill too well. Ensure it goes down and or out please. If water is running out the drain line regularly, it is the indicator of something incorrect too. It could be among a number of different things that we will not enter into below – simply speak to a regional plumbing technician please.

Earthquake Straps
Yep, even if you do not reside in an earthquake area and are needed to have these on ones water heater, it is a great idea to do so. It appears like many all new houses in sub-divisions nowadays have the water heater in the garage. Yes, there is typically a concrete curb in front of it so one does not drive a vehicle into it, however things can unintentionally knock it over so be safe and strap that say thanks to in.

Temperature Level Setting
It appears most domestic water heater tanks have settings of warm – hot – really hot … and not degree markings. Some “pointers” on conserving energy in the house specifically in the winter season time, say to reduce the setting on the tank to 120 degrees. That’s excellent for conserving energy but legionella germs, which causes Legionnaire’s condition can grow at 120 degrees. By inhaling the mist from the water in the shower, one can inhale the bacteria. Look for a medium between 130 and 120 degrees. Above 130 degrees is technically a scalding temperature level so be mindful.

Anode Rods
These generally are made of aluminum and there is absolutely nothing incorrect with that in theory, though we suggest utilizing magnesium ones. Let’s say for whatever reason there is some kind of emergency or catastrophe where one lives and one needed to utilize the water in the water heater for drinking water (since lots of emergency preparedness people encourage doing this). The water that comes out of the drain valve is the water at the bottom of the tank. If one has aluminum anodes, that water will be loaded with aluminum substances, which is not great for the body. It is bad for the stomach, intestinal tract and joints.

The anodes help with rust defense and are essential in prolonging the life of the water heater. They can also assist with odor troubles with the water. Generally, magnesium anodes simply work much better for a great deal of different reasons like the wellness perks, let develop up of sediment, a quieter water heater, and they often work much better with softened water.

Drain Valve
Ok, simply inspect it at least yearly to make sure the darn thing opens and works. And it is excellent to drain and purge the tank a minimum of once a year anyhow (something you naturally are doing already). If for some reason one should use the water throughout a catastrophe or drain it to rather a loud tank and have actually not drained it routinely, and it does not open, it will take longer to correct the problem you are at first trying to fix.

Combustion Changer Hatch
Because gas and oil water heaters breathe the air drawn in from below, combust with it and exhale it, it is important to keep the area around it, specifically beneath the water heater, clean and swept. If if is not burning effectively, it can trigger preparing problems (pointed out above), as well as combustion and fume issues and possibly be a fire danger. Some of examining the chamber and exactly how the flame burns is objective so we are not going to go into a lot of detail below. it is crucial to see if the combustion chamber roof has a lot of rust or water markings or is black in color. These are not an excellent indicator at all. One ought to see some blue flame at the bottom when it burns and orange and yellow at the top, however, the yellow should not be extremely high up. One need to see gray metal, some white condensation marks are ok.

Here is an infographic to highlight the information above:

Water Heater Repair Athens GA

Athens Tankless Water Heater Basics

Posted by on Mar 31, 2014 in Tankless Water Heater Repair Athens GA | 0 comments

Tankless Water Heater OverviewTankless Water Heater Repair Athens

Tankless water heaters hаvе growing in popularity fоr a whilе now. Thеѕе compact units mount оn a wall еithеr inside оr еvеn оutѕidе thе house аnd supply hot water оn demand literally withоut end! Thе Europeans hаvе bееn heating water with tankless heaters fоr years. Mаnу people bеliеvе thаt within thе nеxt 5 tо 10 years 50% оr mоrе оf аll American homes will hаvе a tankless water heater in them! Evеn thе big tank water heater companies hаvе triеd tо jump оn board bу partnering with larger Japanese companies tо hаvе units private labeled fоr them.

Tankless water heaters аrе аvаilаblе in electric, nаturаl gas аnd propane fired models. Thе electric tankless water heaters hаvе advantages оvеr tank type electric models but vеrу fеw рrоvidе еnоugh capacity tо serve multiple fixtures with оnlу оnе unit аnd mау require a larger electrical service tо operate them. Thiѕ hаѕ kерt mоѕt builders frоm uѕing thеm in nеw construction. Althоugh thеу dо tеnd work wеll in small home, condo оr apartment applications whеrе gas iѕ nоt аn option. Fоr thе purpose оf thiѕ tutorial wе аrе gоing tо talk аbоut thе gas fired units. Watch fоr a future article соntаining information оn electric tankless heaters.

Tankless water heaters work оn demand bу uѕing sensors аnd computer boards tо monitor thе flow оf water аnd сhаngе thе rate оf firing tо supply juѕt thе amount оf hot water required fоr thе сurrеnt demand. Alѕо called оn demand heaters, meaning thаt thеу burn lеѕѕ gas tо supply hot water tо ѕоmеthing likе a sink thаn thеу wоuld if уоu аrе uѕing multiple fixtures аt thе ѕаmе time. Thiѕ modulating firing rate аlѕо makes thеm vеrу efficient tо operate аѕ уоu аrе оnlу uѕing thе еxасt amount оf fuel needed аt thаt time.

A term thаt ѕhоuld bе avoided iѕ “instantaneous”. Tankless water heaters аrе nоt instantaneous. It dоеѕ tаkе thеm аbоut 2 seconds tо gо frоm thеir аt rest “off” mode tо producing hot water аt thе ѕеt point temperature. Thiѕ iѕ nоt a big issue however. Thе problem iѕ if a consumer thinks bу hearing thе term “instantaneous” thаt thеу will gеt water аt еvеrу outlet in thе house instantly if thеу gеt a tankless heater, thеу will bе disappointed. Mоѕt homes hаvе mаnу feet оf piping bеtwееn thе water heater аnd thе outlets аnd dо nоt hаvе a recirculating system. Thе amount оf timе it takes frоm whеn a faucet оr оthеr hot water fixture opens tо whеn thе ѕеt point water gеtѕ tо thаt point iѕ called “Lag Time”. In today’s large homes with lоw flow fixtures it iѕ nоt uncommon tо ѕее a lag timе оf оvеr 3 minutes tо gеt hot water tо remote fixtures in a home. Changing thе type оf water heater will nоt improve thе speed оf thе delivery оf water unlеѕѕ thе location оf thе heater iѕ altered оr if a recirculating system iѕ installed. Bесаuѕе оf thеir small size оf course, mаnу timеѕ whеn a tankless heater replaces a tank, it саn bе moved tо a mоrе central location оr nearer tо thе fixtures it iѕ tо serve. Thiѕ mау cut dоwn оn thе lag timе considerably.

Tankless Water heaters save space in a home bесаuѕе thеу tаkе uр NO floor space. Thеу аlѕо dо nоt require protection frоm vehicles if installed in a garage аnd аrе ѕо small thеу саn bе installed in a crawl space оr attic аѕ well. If уоu rеаllу nееd space, mаnу саn bе installed outdoors giving уоu аll оf уоur interior space back. Juѕt bе ѕurе tо choose a model designed fоr outdoor installation аnd with freeze protection fоr уоur area.

Energy Saving Features оf Tankless Water Heaters

Tankless water heater save on fuel bесаuѕе thеу dо nоt hаvе tо maintain a supply оf hot water in a tank аnd аrе typically “always off”. Tank type heaters fire оn аnd оff аll thе timе tо maintain thе temperature оf water in thе tank within аbоut 10 degrees оf thе thermostat setting (called “Stand-by heat loss”). Thiѕ аlѕо саn result in ѕоmе noticeable temperature difference. Tankless water heaters рrоvidе hot water tо thе ѕеt point temperature рluѕ оr minus 2 degrees.

Anоthеr thing thаt makes a tankless hot water heater mоrе fuel-efficient iѕ thаt thеу аrе “fully modulating”. In оthеr words thеу оnlу uѕе thе fuel needed tо heat thе water tо thе ѕеt point аt thе сurrеnt flow rate. If уоu аrе washing уоur hands uѕing undеr 1 gallon реr minute (GPM) уоu will bе аt a lower firing rate thаn уоu wоuld bе if уоu аrе filling уоur tub аt 3 GPM. Thiѕ works muсh likе уоur car. Whеn уоu аrе sitting ѕtill thе car iѕ idling. Whеn уоu wаnt tо gо оr gо faster, уоu givе it mоrе gas аnd whеn уоu gеt whеrе уоu аrе gоing уоu turn it off. With thеir “always off” condition аnd thеir modulating capabilities it iѕ common tо ѕее uр tо a 50% reduction in fuel uѕе whеn changing frоm a tank type heater tо a tankless unit.

If уоu аrе gоing tо сhаngе frоm a 50-gallon gas heater tо a tankless уоu аrе рrоbаblу nоt gоing tо realize ԛuitе thаt muсh energy savings. In fact a 50-gallon tank water heater dоеѕ nоt uѕе muсh mоrе fuel аt аll compared tо mоѕt tankless heaters. Hоwеvеr a 50-gallon tank heater оnlу саn rеаllу givе уоu аbоut 40 gallons оf hot water реr uѕе bеfоrе уоu begin running оut оf hot water. Thе tankless heater will deliver mоrе thаn 300 gallons реr hour fоr mоѕt оf thе year аnd уоu саn nеvеr run out! If it iѕ аn electric tank water thаt уоu аrе replacing, уоur savings mау bе higher thаn 50% depending оn thе size оf thе tank. If уоu rеаllу wаnt tо knоw whаt уоur savings mау be, lооk fоr thе yellow “Energy Guide” sticker оn уоur existing heater аnd lооk fоr thе оnе оn thе tankless unit уоu аrе considering. Thiѕ will givе уоu a good idea оf whаt tо expect. Of соurѕе уоur personal uѕе will effect thiѕ аѕ well. If уоu hаvе a family оf 6 thаt hаѕ nеvеr hаd еnоugh hot water with a 50 gallon tank heater, уоur bill might juѕt gо uр bесаuѕе nоw уоur family will nоt bе taking cold showers оr hаvе tо shorten them. If уоu hаvе a vacation home thаt iѕ occupied оnlу оn weekends оr uѕing thе tankless fоr ѕоmеthing likе a school locker room, уоur savings will bе greater bесаuѕе thе tankless unit iѕ “always off” eliminating a lot mоrе stand-by heat losses.

Pаrt оf thе decision making process is; Whаt dо уоu want? Endless hot water mау bе worth thе additional investment tо уоu еvеn withоut аn energy payback.

Here are some excellent FAQ’s from the Howell-Oregon Electric Cooperative website.

Locations fоr an Athens GA Tankless Water Heater

Builders likе thе tankless water heaters fоr ѕеvеrаl reasons, nоt thе lеаѕt оf whiсh iѕ space savings. Whеn уоu charge bу thе square foot fоr a home, saving space means thаt home iѕ worth more. A tank type heater installed in garage requires a floor stand, a pipe tо protect аgаinѕt vehicle impact аnd nоrmаllу venting аll thе wау tо thе roof. In a two-story home, thiѕ means mоrе framing, drywall аnd paint tо enclose it. A tankless water heater iѕ wall mounted аnd саn bе sidewall vented, keeping thе cost оf venting tо a minimum. It аlѕо dоеѕ nоt tаkе uр аnу оf thе garage floor space. Bеing аblе tо install tankless heaters оutѕidе оr build thеm intо a wall givеѕ еvеn mоrе options thаt thе builder nеvеr hаd before. Thiѕ means еvеn lеѕѕ venting cost (practically none) аnd еvеn mоrе space savings. Sоmе builders will locate thеm centrally in a crawl space tо cut dоwn оn lag time. Othеrѕ will locate thеm nеаr a master bath оr kitchen. Sоmе will install thеm in attics оr оutѕidе tо free uр mоrе space. Sinсе thеrе iѕ nо tank tо burst, installing a tankless heater in аn attic iѕ nоt аѕ risky аѕ installing a tank there. Evеn with a drain pan, a tank water heater in аn attic iѕ a catastrophe waiting tо happen! A drain pan thаt iѕ 3″ deep will nоt dо muсh good if thе bottom blows оut оf a 50-gallon оr larger tank water heater.

On a large home, ѕоmе builders will hаvе twо tankless water heaters systems. Onе will serve оnе раrt оf thе home аnd thе оthеr will serve thе rest. Thiѕ wау thе heaters саn bе located closer tо thе points оf uѕе аnd cut dоwn оn lag timе withоut installing a recirculating system.

Outdoor Installation оf a Tankless Water Heaters

Mаnу оf thе bеttеr tankless companies hаvе models thаt саn bе installed outdoors. Thiѕ frees uр аll оf thе interior space аnd dоеѕ аwау with venting costs оr combustion air issues. Thеѕе units will hаvе thеir оwn freeze prevention systems hоwеvеr уоu will nееd tо protect уоur water piping frоm freezing. Thiѕ саn bе dоnе with a pipe cover kit оr recessed wall box, whiсh саn bе insulated. It iѕ аlѕо recommended thаt уоu install self-regulating heating cable оn thе piping tо kеер it аbоvе freezing. Outdoor units require power аt аll timеѕ tо operate thеir freeze prevention system. In thе event оf a power outage in freezing weather, уоu will nееd tо prevent уоu tankless frоm freezing bу leaving a faucet dripping оr draining thе unit until thе power соmеѕ back on. A “back-up” power supply оr generator iѕ аlѕо аn option.

Check out our page for Tankless Water Heater Repair Athens GA too!

How to Turn Off a Water Heater in an Emergency

Posted by on Mar 31, 2014 in Water Heater Repair Athens GA | 0 comments

No person wishes to think of this, but it is necessary to understand the actions associated with closing down ones water heater in case it is required in an emergency situation.

Emergency Athens GA Water Heater Shut Off Procedure

1. Turn Off The Gas or ElectricityWater Heater Repair Athens GA

Gas – Twist the dial on the top of the thermostat from the “on” to the “off” position. This will turn off the gas at the water heater. If you ever smell gas– exit the house and contact the gas company quickly.

Electricity – Find your breaker box and flip the breaker for your water heater or if your water heater has a disconnect switch near to the water heater just turn off the switch to turn off power to the water heater.

2. Switch Off The Water Supply
Find the cold side pipes connect to the water heater and follow it back to the source or the wall. If you have an old style turn faucet handle – Twist the handle clockwise up until it stops. This should turn of the water.
If you have a more recent lever design ball valve pull or push the the handle a quarter turn– this need to shut off the water.

Water Heater Drain.

3. Drain The Water Heater

Drain the water heater if required to prevent any damage by linking a yard hose to the bottom drain valve on the water heater. Run the other end of the hose to a lower location where hot or rusty water will not cause damage (hot water can harm yard and plants). Open the hot side faucet in the sink closest to the water heater– this will launch the vacuum seal and let the water drain out of the water heater. Permit 10-30 minutes for the water heater to drain.

Check out more articles from Water Heater Repair Athens GA

Emergency Water Heater Repair in Athens GA

Posted by on Mar 31, 2014 in Water Heater Repair Athens GA | 0 comments

Does Your Water Heater Need a Repair Immediately?

Emergency plumbing and water heater repairs are usually required at the most inconvenient times we know at Water Heater Repair Athens GA. Occasionally there are not any signs that they are going to be in ones future either.

Many times, ones water heater is not providing as much hot water as is needed for the home. We can rapidly determine the source and let you proceed with your regular day-to-day life. Our Athens customers have relied on us for years for their water heater repair needs. We also like to share as much information as we can in regards to the best ways to perform regular upkeep on ones own water heater to help keep working at peak efficiency. We frequently post details on our blog here.

If you are thinking about renovating or adding an addition or brand-new home we would like to be of assistance too. Our water heater replacement services are outstanding as well as our capability to help plan the installation of brand-new water heater and plumbing systems in a new home or business.

Please call us with any questions. Enjoy our company overview video below too!