Tankless Water Heater Repair Athens GA

Athens Tankless Water Heater Troubleshooting

Normally, most of the troubles that could occur with a tankless water heater, triggering it to require a repair are external factors. Below are a few of them:Tankless Water Heater Repair Athens GA

  • The venting is not right. The most common error is the use of regular B-vent, which can quickly damage the heat exchanger due to acidic condensation.
  • Check the gas supply line. In some cases the supply line is undersized and was simply connected to the existing line size. The size specified in the setup handbook has to be utilized.
  • The gas pressure is not appropriate. The working pressure needs to be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, depending on the design.
  • The incorrect type of gas that is being utilized – natural gas or liquid propane. It is not possible to utilize the non-specified kind.
  • Water flow or temperature level fluctuation issues. There are numerous things we will check to see to it they are working appropriately, like cleaning or replacing the input filter, examining the check valve, examining the seals in the faucets and looking to see if there is a cross flow someplace that should be taken care of.
  • Hard Water Problems: In areas where the water is really hard, de-scaling will be required regularly.
  • Environmental concerns. The heaters must be installed in a clean area with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Back to Water Heater Repair Athens GA