Water Heater Replacement Athens GA

The Best Type of Water Heater Replacement Athens GA Unit

Water Heater Replacement Athens GA

There are two sorts of conventional water heaters, gas and electric. An electric water heater can be made use of virtually anywhere. A gas water heater is most likely to be installed in a home that already makes use of gas for another appliance such as a furnace or stove. Building codes might dictate the positioning of gas water heaters, limiting them to locations outside of typical house activity.

It is likely if you are changing a water heater, you’ll merely replace it with the same type of unit that was currently there. However, there are upgrade possibilities that ought to be considered. For instance: if space enables, you might decide to enhance the system’s holding capacity to accommodate your growing household. Another vital factor to consider is the device’s energy efficiency. Replacement time is the ideal time to decrease your energy costs by choosing a water heater that is more energy reliable.

When looking for a water heater, consider these functions

  • Gallon capability (40-gallon and 50-gallon heaters are most common).
  • Recovery rate (the variety of gallons the heater will heat up in an hour).
  • Dimensions (width and height – physical space may restrict your capability to update your system’s capacity and will the heater fit in the area you have for it?).
  • The energy efficiency score (a sticker label on the side ought to note the estimated yearly expense of operation for the device).

Prior to making any repairs or buying a new water heater, check the nameplate on the side of your present unit. Right here you will find useful info consisting of the tank ability, insulation R-value, installation standards, working pressure, model and serial number. If you have an electric water heater, the nameplate will likewise list the wattage capacity and voltage of the heating elements.

Athens Water Heater MaintenanceWater Heater Replacement Athens

Water heaters today have actually come a long way and are produced to need little or no upkeep, and few different issues can go wrong with them. Nonetheless, with any appliance, without regular upkeep numerous various problems can be stayed clear of.

  • The water in the tank should be drained twice a year to get rid of any sediment that collects which can trigger deterioration and to enhance its effectiveness. This will also make the system operate more quietly.
  • Test the pressure-relief valve by raising the valve’s handle and letting it snap back. This should release a burst of water into the overflow drain. If it does not, a new valve must be installed. Following the testing, also watch out for small leaks from the valve.
  • The temperature setting on the thermostat should be around 120 degrees. By doing this will decrease potential damage to the tank caused by overheating.
  • Maintain 2 feet of clearance around the water heater unless the manual specifically states otherwise.
  • Every 3 to 5 years, examine the sacrificial anode rod by loosening the hex head screw and eliminating it. If more than six inches of the core steel wire is exposed, change the rod.
  • Insulate older devices with a fiberglass jacket to improve effectiveness, being cautious to avoid contact with the flue. More recent systems currently are optimized for peak energy efficiency.
  • When going away from home for a while, adjust the thermostat on gas heaters to “Vacation” setting, which maintains the pilot light without heating the water.

Typical Problems
Because water heaters contain few moving parts, just a few things can go incorrect.

  • Pilot light on gas water heater flickers out
  • Circuit breaker for an electric heater trips
  • Burner or heating aspect fails
  • Thermostat breaks
  • Valve sticks

Maybe the most usual trouble linked with a water heater is the water is not getting as hot as one would like. This is generally triggered by a defective thermostat or a defective heating aspect.

Other usual problems and possible options

  • Hissing or sizzling noises: Sediment could have gathered in the tank. Drain the tank until the water clears. Soak elements in vinegar and scrape collected scale.
  • Leaking pressure-relief valve: Replace valve.
  • Leaking water system pipes: Tighten the fittings. If that does not work, turn off the water and replace the fittings.

The best ways to detect water heater troubles

Standard water heaters are simple. Cold water gets in the tank and is heated up by an electric element or burner. A thermostat controls the temperature, generally 120 to 140 degrees. As the water heats up, pressure builds inside the tank. When you switch on a tap, pressure sends hot water out the faucet. Nonetheless, if the tank is more than 10 years old, or if it’s leaking, a new water tank most likely is in your future.

On to How to Choose an Athens GA Water Heater